EN
Large-format 3D printer SAM by Mach-3D in a dark studio with smoke

DEVELOPED AND BUILT IN KIEL · CE-CONFORMED · MADE IN GERMANY

SAM large-format 3D printer: large build volume, built in Kiel

The SAM is a large-format 3D printer with a build area of 900 × 900 × 1000 mm, up to 500 mm/s and a hotend up to 450 °C. It is designed and built in Altenholz near Kiel. It prints large plastic components in one piece, in a closed, heated build area, for prototypes, small series, and spare parts.

900 × 900 × 1000 mm build volume · up to 500 mm/s · up to 450 °C

Response within 1–2 working days · Watch the video (2 min)

900 × 900 × 1000

mm construction space

500 mm/s

Max speed

450 °C

Hotend temperature

120 mm³/s

max. volumetric flow

BUILT FOR DURABLE OPERATION

Why the SAM large format 3D printer?

The SAM is Mach-3D's in-house developed large-format FDM printer designed for industrial plastic large-scale components. The SAM relies on industrial components instead of consumer technology: from the extruder to the spindles to maintenance.

Pressure head of the SAM large format 3D printer with Bondtech extruder, close-up

01

Process safety

Bondtech's extruders maintain a stable pressure process and deliver consistent results for small-batch production. Ball recirculating spindles with drives in a closed control loop provide high precision with high wear resistance.

SAM prints a component under green interior lighting

02

Speed

Up to 500 mm/s printing speed and a max. volumetric flow of 120 mm³/s. Ball screws (X/Y) and lead screws (Z) keep the position secure and move precisely, even in large-format printing processes.

Technicians install components in the SAM's construction area

03

Modularity

All the main components are quick and easy to disassemble; you can upgrade with just a few simple steps to add new features. This keeps maintenance times short.

Large format 3D printer SAM, front view
  • 0.1 mm positioning accuracy High precision: Controlled by a Duet 3 system based on RepRap. · Origin: Developed and built near Kiel, CE compliant.
  • 900 × 900 × 1000 mm Volume: Large FDM parts in one print, no sectioning with complex joining systems. · Camera monitoring: Heat-resistant interior cameras make print monitoring easier. · Interior lighting: RGB LED lights illuminate the build chamber.
  • up to 450 °C High temperatures: Hotends from Lukes Laboratory open up a wide range of printable materials. · Nozzles: Recommended: Dianoz Pro compatible with V6 with diamond tip, 0.4 / 0.6 / 1.0 / 2.0 mm.
  • 500 mm/s Drive: Ball screws (X/Y) and trapezoidal spindles (Z): secure positioning, precise movement. · Throughput: Max. volumetric flow 120 mm³/s.
  • Print bed up to 120 °C Heated print bed: A heated build plate, fan system and good insulation keep energy use low and print conditions stable.
  • Wing doors Enclosed build chamber: The full enclosure provides a protected print atmosphere; wing doors make removing the finished print easy.
  • Compact and modular Compactness: Compact and easy to move (pallet-truck guide) to fit into any production site. · Spool holder: Filament supply matched to the high material throughput, for spools up to 8 kg. · Modularity: Quick to dismantle, new features can be retrofitted in a few steps.
  • Large-format 3D printer SAM

ALL 11 CHARACTERISTICS IN ONE LIST

That's what the SAM is all about, from compactness to a closed construction space:

01

Compactness

The SAM was designed to be compact and easy to transport (with a lifting carriage) so that it could be placed in any production facility.

02

Volume

The usable dimensions for the structural build area are 900 mm × 900 mm × 1000 mm, allowing the printing of large FDM parts. This eliminates the need for section-by-section construction using multiple prints with complex connection systems.

03

CCTV

Heat-resistant indoor cameras simplify pressure monitoring.

04

Interior lighting

RGB LED lights illuminate the build chamber and provide the desired visual effects.

05

Drive

The SAM relies on a robust drive combination of ball screws (X/Y) and lead screws (Z). This system combines secure positioning with precise, efficient movement for large-format printing processes.

06

Coil holder

The filament supply is linked to the high material processing speed. The holders are designed for coils up to 8 kg.

07

High precision

Precise printing results are ensured by a positioning accuracy of 0.1 mm, controlled via a Duet 3 system based on RepRap technology.

08

Nozzles

Recommended: V6-compatible Dianoz Pro nozzles with a diamond tip in sizes 0.4 / 0.6 / 1.0 / 2.0 mm.

09

High temperatures

Thanks to the hotends from Lukes Laboratory, the SAM reaches temperatures of up to 450 °C. This opens up a wide range of printable materials.

10

Heating element for pressure bed

Heated pressure plate, fan system and good insulation ensure low energy consumption and maintain stable pressure conditions.

11

Enclosed installation space

The full enclosure provides a protected print atmosphere. Wing doors make it easy to remove the finished print.

INTERACTIVE · 11 FEATURES

Discovering technical features on the SAM

Click on a number in the image or scroll with the arrows.

SAM Large-Area 3D Printer with Open Doors – 11 Features

FEATURES 02 / 11

Volume

The usable dimensions for the structural build area are 900 mm × 900 mm × 1000 mm, allowing the printing of large FDM parts. This eliminates the need for section-by-section construction using multiple prints with complex connection systems.

Does your component fit in the SAM? Have the component inspected

Team from Mach-3D Development during the development of the SAM

The development team of SAM in Altenholz

Large format 3D printer SAM (Visualization)

The SAM

MACH-3D SERVICE · ALTENHOLZ NEAR KIEL

Built by the team that supports you

Only a functional printer is a good printer. Those who develop the SAM also maintain it. Training sessions are ongoing. Mach-3D Academy. From installation to maintenance to consulting and training, the technicians and experts from Mach-3D are available as a team.

01

Ready-to-Print installation

A technician delivers the SAM to your location and starts it up, without interrupting your ongoing operations.

02

Maintenance along with development

Maintenance technicians and development are in constant contact. Maintenance and repairs are therefore carried out without any unnecessary delays.

03

Training at the Academy

Training in large-format additive manufacturing, also for teams with experience using smaller printers.

Brian Altengarten, process consultant for additive manufacturing at Mach-3D

Brian Altengarten

Additive manufacturing process consultant

Contact person SAM

Erik Dieckmann, Managing Director at Mach-3D

Erik Dieckmann

Managing Director

Mach-3D Development GmbH

DATA SHEET

Technical data of the large format 3D printer SAM

Build chamber

Printing processFFF 3D printing
Build volume900 × 900 × 1000 mm (around 0.8 m³)
External dimensions1300 × 1300 × 1850 mm
Build chamberenclosed
Max. chamber temperature70 °C
Chamber heating power4500 W
Weightapprox. 750 kg

Motion

Max. speed500 mm/s
Max. acceleration20,000 mm/s²
Positioning accuracy0.1 mm
DriveBall screws (X/Y), lead screws (Z)

Extrusion

ExtruderBondtech LGX Pro Metal HT
HotendLuke's Laboratory Chube Conduction
Max. nozzle temperature450 °C
Hotend heating power120 W
NozzlesV6-compatible
Recommended nozzlesDianoz Pro 0.4 / 0.6 / 1.0 / 2.0 mm
Max. volumetric flow rate120 mm³/s
Filament diameter1.75 mm or 2.85 mm (per tool)
Tool changemanual, approx. 10 minutes

Build plate

Build plateGlass plate
Max. plate temperature120 °C
Plate heating power3200 W

Electrical

Max. connected load10,000 W
Power supply3-phase, 400 V
InterfaceLAN
Sound pressure levelbelow 70 dB(A)
DirectivesCE

Software and materials

ControllerDuet 3 (RepRapFirmware)
SlicersOrca Slicer, PrusaSlicer, others on request
MaterialsPLA, PETG, PA-CF, PA-GF, ABS, ABS-GF, ASA, ASA-GF, PP, PP-GF and more

Price on request · Values as per technical datasheet, as of 21 October 2026

Manufacturer's specifications, as of 21 October 2026

SAM at a glance: CE-compliant · 1.75 or 2.85 mm filament · Open system (Orca Slicer, PrusaSlicer and others) · Modular upgradeable · Cyber secure, cloud-independent

MATERIALS

What materials does the SAM print?

10 materials and more, from PLA and PETG to fibre-reinforced PA-CF. A hotend up to 450 °C and a build chamber up to 70 °C keep even glass- and carbon-fibre-reinforced materials free of warping. More in the Guide.

Slicers: Orca Slicer, PrusaSlicer, others on request

PLAPETGPA-CFPA-GFABSABS-GFASAASA-GFPPPP-GFand more

LARGE BUILDING AREA

Large print bed: 900 × 900 mm with 1000 mm build height

900 × 900 × 1000 mm: around 0.8 cubic metres of usable build volume on a 900 × 900 mm print bed. This lets the large-format 3D printer print large parts in one piece.

Large FDM-Components are produced in one piece: a large build area only counts if you can fully utilize it, and with the SAM you have the entire printing area available up to 1000 mm in height. Sectional construction over multiple prints with complex connection systems is eliminated, and with it, adhesive seams and rework at the joint points.

The build area is heated to 70 °C and the print bed to 120 °C, with wing doors for retrieval. The SAM remains compact outside: around 1300 × 1300 × 1850 mm, transportable by forklift. How you compare printers with large build area is shown in the Buying advice: 3D printers with plenty of build space. Examples of applications are shown Industrial 3D printing: Applications & Solutions.

Large format 3D printer SAM: large component assembled in the assembly area, person for size comparison

0.8 m³

Build volume

900 × 900

mm printing area

1000 mm

Building height

The build volume in detail

Protected pressurized atmosphere, heated pressure plate and RGB LED lighting: a look inside the SAM.

Closed construction area of the SAM: both wing doors closed

Enclosed build chamber with wing doors

Interior of the SAM with green-lit RGB LED lighting during printing

Interior with RGB LED lighting

BUILDING PART CHECK

Does your part fit the large format 3D printer SAM?

Four questions determine whether your component belongs on the SAM. If you are unsure, the team will review the component, material, and quantity with you.

Dimensions

If your component fits in a 900 × 900 × 1000 mm space, the SAM will print it in one piece: without sectioning, adhesive seams, and rework on the joining points.

Material

10 materials and more, from PLA to PA-CF. A hotend up to 450 °C and a build chamber up to 70 °C keep even glass- and carbon-fibre-reinforced materials low in warping.

Quantity

Single part, prototype in original size or small series: The SAM prints without tools and without mold construction, including spare parts for which there is no longer any tooling available.

Detail or pace

Diamond-tip nozzles in 0.4 / 0.6 / 1.0 / 2.0 mm: the fine nozzle for details, the large one for fast material deposition at a max. volumetric flow of 120 mm³/s.

PRODUCT VIDEO · 2 MIN

The large format SAM 3D printer in use

Designed for continuous industrial operation: The SAM integrates directly into your production, from the prototype to the small-scale series, day after day.

FIELD TEST · PROTOTYPE TO SMALL-SCALE PRODUCTION

ECONOMICITY

When is a dedicated large-format 3D printer worth buying?

Typically, about one large component per week: Then the bill shifts from the purchase of the component to the purchase of the own machine.

The reason: tooling costs and lead times disappear. You print large parts when you need them, in your own facility. What to look out for is explained in our guide to buying a large-format 3D printer.

If you only need large parts occasionally, the Large-format 3D printing as a service Cheaper: Mach-3D Fabrication prints them on the SAM for you. Background information about the machine: Large-area 3D printers.

Typical missions of the SAM

Small-scale production of large components: when the quantity of pieces does not justify a mold design.
Prototyping: economically, even though the prototype is too large for classic 3D printers.
Spare parts: reproduce it if there is no longer any tool available.
Alternative to machining: Plastic large-scale components without machining processes.
Independence: less dependence on external production factors and supply chains.

Installation, maintenance and training are all handled by one company.

PODCAST

Why Mach-3D built its own large-scale machine

In the 3D printing podcast, Erik Dieckmann, founder and managing director of Mach-3D, explains why failed printing in the Greater Zurich Area costs more than the material: downtime, delivery deadlines, staff. This very experience as a manufacturing service provider led to his own machine.

Further technical articles about the SAM and Mach-3D are being collected by Press page.

Preview image of the podcast episode „Large-scale 3D Printing: Between Gaming and Process Security“ with Erik Dieckmann from Mach-3D

▶ YOUTUBE · Approx. 46 minutes

LOOKING AHEAD · FORMNEXT 2026

Formnext 2026: see the SAM live in Frankfurt

Mach-3D presents at the Formnext 2026 and presents the SAM with further features that go beyond classic additive manufacturing. Stay tuned!

  • Trade fairFormnext 2026
  • Date17–20 November 2026
  • VenueMesse Frankfurt
  • BoothHall 12.1, Booth G91

QUALITY AND TRUSTWORTHINESS

Data security, confidentiality & quality

Your data remains your data. Our 3D printing calculator is an in-house development: The file is analyzed directly in your browser, without third-party services. Many projects are sensitive internally. We respect that.

We work according to the requirements of DIN EN ISO 9001:2015.

Frequently asked questions about the SAM large format 3D printer

Is your question missing? Ask a question directly

For whom is a dedicated large-format 3D printer worth buying?

For anyone who regularly needs large components: a large-format 3D printer of your own typically pays off from around one component of this size per week, because tooling costs and lead times disappear. The SAM prints 900 × 900 × 1000 mm in one piece and, with 450 °C at the hotend, also processes fibre-reinforced materials such as PA-CF and PA-GF.

Three things: around 0.8 cubic metres of build volume, the heated build chamber for warp-free printing of technical materials and the design for continuous operation. An office printer prints display parts; the SAM is a production machine for 10 materials and more, built in Altenholz near Kiel.

10 materials and more: PLA, PETG, PA-CF, PA-GF, ABS, ABS-GF, ASA, ASA-GF, PP and PP-GF. Further materials on request.

The SAM is an open system and can be used with Orca Slicer and PrusaSlicer; other slicers on request. Tools are available for 1.75 mm or 2.85 mm filament.

The build space measures 900 × 900 × 1000 mm, the external dimensions around 1300 × 1300 × 1850 mm with a weight of approximately 750 kg. The SAM is built compactly and can be transported by a forklift. It prints large FDM components without sectioning.

The SAM reaches a maximum printing speed of 500 mm/s with a maximum volumetric flow of 120 mm³/s and an acceleration of up to 20,000 mm/s² (20 m/s²). The positioning accuracy is 0.1 mm.

Thanks to the hotends from Lukes Laboratory, the SAM reaches temperatures of up to 450 °C. This opens up a wide range of printable materials, from standard plastics to fiber-reinforced high-performance materials. The printing bed heats up to 120 °C, the build area up to 70 °C.

For small-series production of large-format plastic components, economical prototyping, the remanufacturing of spare parts, and as an alternative to machining processes, for greater independence from external production factors.

Price on request. You will receive a concrete offer after a personal consultation.

Yes. The SAM is a managed system: Ready-to-Print installation on-site, maintenance in close collaboration with development, training on the system. Mach-3D Academy. The academy offers training in large-format additive manufacturing.

CONCLUSION

Anyone who wants to regularly manufacture large plastic components themselves will find the SAM large format 3D printer from Mach-3D Development GmbH in Altenholz near Kiel a manufacturing machine. It is operated by the same team that developed it: installation, maintenance, and training included.

SAM large-format 3D printer: designed and built in Kiel

The SAM Large-Format 3D Printer is Mach-3D’s answer to expensive tools and long delivery chains: 900 × 900 × 1000 mm build space, up to 500 mm/s and up to 450 °C, made in Germany. Additional services around 3D printing and manufacturing: Mach-3D at a glance.

The SAM large-format 3D printer is supplied as a managed service, including installation, maintenance and training: the latter is provided by Mach-3D Academy. The page shows examples of how to use it Industrial 3D printing.

Does the SAM fit your component?

Discuss the component, material, and quantity with the team that is building the SAM.

Co-funded by the European Union – Schleswig-Holstein State Government

The project „Development of the modular RAX platform“ is funded by the state program Wirtschaft 2021–2027 with funds from the European Regional Development Fund. About the project